My Blog

Posts for: January, 2017

By Kenneth J Oskowiak & Associates, DMD, PC
January 24, 2017
Category: Oral Health
Tags: x-ray  
The21stCenturyPromisesBetterDentalDiagnosticswithConeBeamImaging

X-rays revolutionized dental care in the 20th Century. The same could happen in the 21st Century as cone beam computed tomography (CBCT) becomes a fixture beside the traditional x-ray machine.

CBCT made its debut in dental offices about a decade and a half ago. It utilizes the same invisible energy as traditional x-rays to create images of the face and jaw. But unlike traditional x-rays, which can only depict structures in the two dimensions of width and height, CBCT can create three-dimensional images in amazing detail.

The CBCT's x-ray projector rotates around a patient's head. As it emits a cone-shaped beam of x-rays, the device simultaneously collects anywhere from 150 to 599 distinct image views. It transmits these views to a computer that assembles them into three-dimensional images that can be viewed on a computer display.

From the data file of images, dentists can re-format a variety of views and angles of teeth, jaws and other facial bones at various levels of magnification. Because of this wide range of views, all in striking detail, CBCTs are highly useful among other things for diagnosis of malocclusions (bad bites), the size and location of infections, obstructions at possible implant sites, or jaw problems prior to surgery.

Because they expose a patient to higher doses of radiation than a standard x-ray machine, they're normally limited to more complex oral situations. That means you'll still undergo standard x-rays for most of your dental treatment needs. CBCT radiation levels are lower, however, than medical CT scans, which use a fan-shaped beam that can expose a patient to ten times the radiation of a CBCT. For dental care, a CBCT machine also produces greater image detail than an MRI.

Depending on your needs, CBCT may one day be a part of your dental care.  With their range and accuracy, it could play a major role in helping you attain good health.

If you would like more information on cone beam diagnostics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Getting the Full Picture with Cone Beam Dental Scans.”


By Kenneth J Oskowiak & Associates, DMD, PC
January 09, 2017
Category: Dental Procedures
DrTravisStorkIfOnlyIdWornAMouthguard

If we could go back in time, we all probably have a few things we wish we could change. Recently, Dr. Travis Stork, emergency room physician and host of the syndicated TV show The Doctors, shared one of his do-over dreams with Dear Doctor magazine: “If I [could have] gone back and told myself as a teenager what to do, I would have worn a mouthguard, not only to protect my teeth but also to help potentially reduce risk of concussion.”

What prompted this wish? The fact that as a teenage basketball player, Stork received an elbow to the mouth that caused his two front teeth to be knocked out of place. The teeth were put back in position, but they soon became darker and began to hurt. Eventually, both were successfully restored with dental crowns. Still, it was a painful (and costly) injury — and one that could have been avoided.

You might not realize it, but when it comes to dental injuries, basketball ranks among the riskier sports. Yet it’s far from the only one. In fact, according to the American Dental Association (ADA), there are some two dozen others — including baseball, hockey, surfing and bicycling — that carry a heightened risk of dental injury. Whenever you’re playing those sports, the ADA recommends you wear a high-quality mouth guard.

Mouthguards have come a long way since they were introduced as protective equipment for boxers in the early 1900’s. Today, three different types are widely available: stock “off-the-shelf” types that come in just a few sizes; mouth-formed “boil-and-bite” types that you adapt to the general contours of your mouth; and custom-made high-quality mouthguards that are made just for you at the dental office.

Of all three types, the dentist-made mouthguards are consistently found to be the most comfortable and best-fitting, and the ones that offer your teeth the greatest protection. What’s more, recent studies suggest that custom-fabricated mouthguards can provide an additional defense against concussion — in fact, they are twice as effective as the other types. That’s why you’ll see more and more professional athletes (and plenty of amateurs as well) sporting custom-made mouthguards at games and practices.

“I would have saved myself a lot of dental heartache if I had worn a mouthguard,” noted Dr. Stork. So take his advice: Wear a mouthguard whenever you play sports — unless you’d like to meet him (or one of his medical colleagues) in a professional capacity…

If you would like more information about mouthguards, please contact us or schedule an appointment for a consultation. You can read more in the Dear Doctor magazine article “Athletic Mouthguards.”


By Kenneth J Oskowiak & Associates, DMD, PC
January 01, 2017
Category: Dental Procedures
Tags: palatal expander  
CorrectaCross-BitebyWideningtheUpperJawwithanExpander

A poor bite (malocclusion) could be more than simply teeth out of alignment. There could be complex causes for the malocclusion, possibly involving the facial bone structure.

An example of this is the development of a cross-bite due to problems with the upper jaw and palate (the roof of the mouth), jointly called the maxilla. The maxilla is in fact formed by two bones fused together in the center of the palate in what's called the midline suture. The suture doesn't completely fuse until after puberty.

Sometimes a maxilla's development doesn't follow a normal track. The upper jaw doesn't widen as it should, which leads to the cross-bite where the upper back teeth abnormally bite inside the lower teeth. The upper front teeth continue to bite normally in front of the lower front teeth. This also can have profound influence on breathing, causing sleep apnea.

We can correct this by using an orthodontic appliance called a palatal expander before the midline suture fuses. The expander gradually widens the upper jaw to its normal width and thus eliminates the cross-bite.

Positioned at the roof of the mouth, the expander has metal arms that extend from a central hinge to exert pressure on the inside of the upper teeth. The patient or a caregiver uses a small key to turn a mechanism that extends the arms toward the teeth a tiny amount each day. This gradually widens the jaw, while at the same time stimulating bone growth at the midline suture. Eventually the gap fills with bone to solidify the new width as the suture fuses.

It's important to undertake this treatment before fusion. If you wait until after puberty, you will need to separate the bones first to attempt it. The overall impact and cost is much less if you act promptly in the early years.

Palatal expansion may not be the right treatment in every case, so we'll need to perform a thorough orthodontic exam first. If, however, we do determine it can help, using an expander can improve function, correct future breathing problems and make possible a more attractive future smile.

If you would like more information on orthodontic treatment options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Palatal Expanders: Orthodontics is more than just Moving Teeth.”